Eavestrough & Gutter Repair in Toronto

Ontario Downspout Service provides eavestrough and gutter repair for homes across Toronto and the GTA, fixing leaking, sagging and damaged eavestroughs. We take on small and large repairs, from resealing a single leaking corner to re-hanging a full run, and we repair what can be repaired instead of pushing a new system. We are a licensed, insured, award-winning father-and-son business that has served GTA homeowners since 2010, and we never subcontract our work.

A leaking or sagging eavestrough rarely stays small. A sag holds water, the extra weight pulls more hangers loose, and the overflow lands beside your foundation. Toronto’s freeze-thaw cycles speed this up: water trapped in a joint freezes, expands and breaks the seal. Fixing it early is usually quick, and it keeps water away from your walls and basement.

Damaged eavestrough pulling away from a Toronto home

Leaking Eavestrough Repair

Most eavestrough leaks start at the joints, where sealant has aged and cracked. We find exactly where the water is getting out and fix it properly:

  • Resealing leaking corners (mitres), end caps and seams
  • Replacing failed end caps and downspout outlets
  • Patching or replacing sections with holes, cracks or corrosion
  • Re-securing sections that have separated at a joint
  • Correcting water that runs behind the eavestrough at the roof edge

Every repair finishes with a water test so you know it is holding before we leave.

Sagging Eavestrough Repair

Sagging eavestroughs are usually caused by loose or failed hangers, old spike-and-ferrule fasteners working out of the wood, ice and snow weight, or a clog holding water. Left alone, a sag stops water from reaching the downspout and pulls the rest of the run down with it.

  • Re-fastening the run with new hangers and screws into solid fascia
  • Restoring the slope so water runs to each downspout, commonly about 6 mm of fall for every 3 metres of run (see How Proper Eavestrough Slope Helps Protect Your Foundation)
  • Checking the fascia board behind the eavestrough and replacing soft or rotted sections (see soffit and fascia)
  • Clearing debris and clogs, and recommending gutter guards (leaf guards) where trees keep clogging the system
Gutter repair on a Toronto home
Copper eavestrough and capping

Repair or Replace?

We repair first whenever a repair will last. Repair is usually the right call for isolated leaks, a few loose hangers, a section damaged by ice or a ladder, or a slope that can be corrected.

Replacement makes more sense when the system is beyond repair: leaks appear at many joints, the metal is corroded, the same problems keep coming back, or the eavestroughs overflow even when clean because they are too small for the roof. In that case we will explain why, and you can read about our eavestrough installation and replacement with 6-inch heavy-gauge aluminum systems.

Read more in What Homeowners Should Know Before Replacing Their Eavestroughs.

Downspout Repairs and Drainage

Leaks and overflow often trace back to a clogged, loose or undersized downspout, or to eavestroughs full of leaves and debris. We check every downspout as part of an eavestrough repair, and we also offer eavestrough cleaning. For full details, see our downspout repair and replacement services, including extensions and City of Toronto downspout disconnection.

If water is already reaching your basement, our residential drainage solutions cover lot regrading and French drains as well.

Eavestrough and downspout on a GTA home

Signs Your Eavestroughs Need Repair

  • Water dripping from corners, seams or end caps during rain
  • Sections sagging, pulling away from the roofline or holding standing water
  • Water spilling over the front or running down the wall behind the eavestrough
  • Peeling paint, stains, rot or other water damage on the fascia and siding below the eavestrough
  • Erosion, puddles or washed-out mulch along the foundation
  • Icicles, ice dams and ice buildup along the eavestrough in winter (see ice dams)

Caught early, most of these are a minor repair rather than a new gutter system.

Our Eavestrough Repair Process

  1. Inspect the whole system. Eavestroughs, hangers, joints, outlets, downspouts and the fascia behind them.
  2. Explain what we found. What is causing the problem and the options to fix it, in plain language.
  3. Repair. Reseal, re-fasten, re-slope or replace the damaged sections.
  4. Water test. We run water through the system to confirm it drains and does not leak.
  5. Clean up. Old sealant, fasteners and debris leave with us.

Why Toronto Homeowners Choose Ontario Downspout Service

  • Eavestrough and drainage specialists. Eavestroughs, downspouts and residential drainage are the core of what we do, with quality workmanship on every gutter repair.
  • Licensed, insured and award-winning. Licensed by the City of Toronto, WSIB-covered and insured up to $5 million. Recognized as Best of HomeStars for more than 10 years.
  • Father-and-son, since 2010. We never subcontract, so the people who inspect your eavestroughs are the people who repair them.
  • Small and large repairs. We fix what needs fixing, from a single corner to a full run, without pushing a new system.
  • Complete roof edge. Gutter guards, soffit and fascia, heating cables and roof repairs from the same team.

Areas We Serve

We repair eavestroughs across Toronto, including North York, East York, Etobicoke and Scarborough, and throughout the GTA in Vaughan, Richmond Hill, Markham, Mississauga and Brampton.

Frequently Asked Questions About Eavestrough Repair

Usually, yes. Most sagging is caused by loose or failed hangers, a clog holding water, or ice weight. We re-fasten the run into solid fascia, restore the slope toward the downspout and clear any blockage. If the fascia behind it has rotted, we replace that section of fascia first so the repair holds.

Water that runs down the wall behind an eavestrough usually means it is getting between the trough and the fascia. Common causes are a missing or short drip edge at the roof edge, a trough mounted too low, or a clog that makes water back up and spill over the back. We find which one it is and correct it at the roof edge. See How Poor Roof Edge Drainage Can Damage Fascia and Soffits.

Yes. Ontario Downspout Service takes on small and large repairs, from resealing a single leaking corner to re-hanging an entire run. You do not need to replace your whole system to get a repair done properly.

Repair makes sense for isolated leaks, a few loose hangers, or one damaged section. Replacement makes more sense when leaks appear at many joints, the metal is corroded, the same problems keep coming back, or the eavestroughs overflow even when clean because they are too small for the roof. We inspect the whole system and tell you honestly which option will last.

If clean eavestroughs still overflow, they are usually too small for the roof area, the slope is wrong, or there are not enough downspouts. Re-pitching the run or adding a downspout can fix it. On larger roofs, upgrading to 6-inch eavestroughs with 3×4-inch downspouts is often the long-term answer. See Is It Normal for Gutters to Overflow in Heavy Rain?.

It depends on the cause and your policy. Damage from a sudden event such as a windstorm, hail or a falling branch may be covered. Damage from wear and tear, gradual sagging or lack of maintenance usually is not. Check your policy or ask your insurance provider before booking a repair.

The problem usually spreads. A sag holds water and pulls more hangers loose, leaks soak the fascia and siding, and overflow lands beside the foundation, where it can lead to soil erosion and basement leaks. In winter, trapped water freezes and can tear sections loose. Repairing it early is almost always simpler.

Book an Eavestrough Repair

Tell us what you are seeing and we will take a look. Contact Ontario Downspout Service or call 416-558-9231.